B&B Electronics MESR424T_D-MT_D-SC - Manual - Manual (Page 28)

3. Setup and Connections
28
For Class C network (IP addresses 192.0.0.0 through 223.255.255.255), the
default subnet mask is 255.255.255.0.
For Class D network (IP addresses 224.0.0.0 through 239.255.255.255) and Class
E network (IP addresses 240.0.0.0 through 255.255.255.255), the subnet mask is
ignored.
Default Gateway field contains default route to remote networks.
Figure 33. Network Settings Screen (DHCP not Selected)
d. More information about assigning an IP address without using a DHCP Server is
contained in the section Configuring the MESR424 Serial Server on Networks
without a DHCP Server.
e. Save changes by Clicking the “Save” button.
11. Modbus TCP Settings
a. To access this screen, click the “Next Button” or click on the Modbus TCP link
on the left side of the screen.
b. This screen allows you Modbus TCP client and server settings.