B&B Electronics MESR424T_D-MT_D-SC - Manual - Manual (Page 35)

3. Setup and Connections
35
Figure 41. Modbus Priority Screen
c. These settings allow the gateway to move high priority messages to the front of
the serial message buffer. The priority can be based on the originating IP address,
the Modbus ID, the Modbus function code, or any combination of the three. Up to
five different priorities can be set.
d. IP Address – Used to set a static Internet protocol address for the Modbus
Gateway.
e. Modbus ID – Valid range is from 1 to 247.
f. Function Code – Valid range is from 1 to 99.
Save settings by clicking the “Save” button.