B&B Electronics 516TX-A - Manual - Manual (Page 9)

(Revised 8/4/2009) 9
WARNING
Never install or work on electrical equipment or cabling during periods of lightning activity. Never
connect or disconnect power when hazardous gasses are present.
Disconnect the power cable before removing the enclosure top.
Do not operate the unit with the top cover removed
UNPACKING
Remove all the equipment from the packaging, and store the packaging in a safe place. File any damage
claims with the carrier.
CLEANING
Clean only with a damp cloth.
SERVICING
No user serviceable parts inside. Removing the top cover will void the warranty.
DIN-Rail Mounting
Install the unit on a standard 35mm Din-Rail. Recess the unit to allow at least 5” of horizontal clearance
for fiber optic cable bend radius (2” for TX models).
Panel and Rack Mounting
With the exception of the 524TX and 526FX2, all N-Tron™ products are designed to be mounted on
industry standard 35mm DIN-Rail. However, DIN-Rail mounting may not be suitable for all
applications. We offer two alternative mounting solutions: Our 900 Panel Mount Assembly (P/N: 900-
PM) may be used to securely mount our 100, 200, 300, 400, 500, or 900 Series products to a panel or
other flat surface; Our Universal Rack Mount Kit (P/N: URMK) may be used to mount our products to
standard 19" racks
900-PM URMK