B&B Electronics 516TX-A - Manual - Manual (Page 26)

(Revised 8/4/2009) 26
Example of the Mirroring config screen:
CLI\SWITCH\MIRROR>config
Configure MIRROR Function
For Port Mirroring, the Source Port is now: 17
Select Source Port [1...26] :
Enter Port Number (or ESC to exit):5
For Port Mirroring, the Source Port is now: 5
For Port Mirroring, the Destination Port is now: 'out of range'
Select Destination Port, one of: 1 2 3 4 6 7 8 25
Enter Port Number (or ESC to exit):9
Select Destination Port, one of: 1 2 3 4 6 7 8 25
Enter Port Number (or ESC to exit):8
For Port Mirroring, the Destination Port is now: 8
Mirror (I)ncoming, (O)utgoing, or <(B)oth> i
Port Mirroring is DISABLED.
When enabled, all frames received at port5
will be mirrored to port8.
CLI\SWITCH\MIRROR>
Example of the Mirroring info screen:
CLI\SWITCH\MIRROR>info
Port Mirroring is DISABLED.
When enabled, all frames received at port5
will be mirrored to port8.
CLI\SWITCH\MIRROR>