B&B Electronics 516TX-A - Manual - Manual (Page 54)

(Revised 8/4/2009) 54
Key Specifications (508TX)
Switch Properties
Number of MAC Addresses 4,000
Aging Time Programmable
Latency Min. 2.2
µs
Backplane Speed 2.6Gb/s
Switching Method Store & Forward
Physical
Height: 2.3"
Width: 5.5"
Depth: 3.5"
Weight: 1.6 lbs
Din-Rail: 35mm
Electrical
Redundant Input Voltage: 10-30 VDC
Input Current: 200 mA @ 24VDC (max current 0.5 A)
Inrush Current: 9.0 Amp/0.6 ms @ 24VDC
Input Ripple: Less than 100 mV
Environmental
Operating Temp: -40oC to 85oC
Storage Temp: -40oC to 85oC
Operating Humidity: 10% to 95% (Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Shock and Vibration
Shock: 200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial
Note: Unit must be Bulkhead mounting to achieve these levels.
Reliability
MTBF: >2Million Hours
Network Media
10BaseT: >Cat3 Cable
100BaseTX: >Cat5 Cable
Connectors
10/100BaseT:
Eight (8) RJ-45 Copper Ports
Serial Port
Com Parameters 9600,n,8,1
Recommended Wiring Clearance:
Front: 2" (5.08 cm)
Side: 3" (7.62 cm)