B&B Electronics RT3G-300_310_320_330_340-W - User Manual - Manual (Page 40)

B&B Electronics, Inc. SPECTRE User Manual
40
SPECTRE_User_Manual_2912m
www.bb-elec.com
www.bb-europe.com
4.9 I/O Port
3-PIN PANEL SOCKET
Pin no. Signal mark Description Data flow direction
1 BIN0 Binary input Input
2 GND Signal ground
3 OUT0 Binary output Output
Table 17: I/O port Connection
Fig. 33: I/O connection
The user interface I/O is for the processing of binary input signals and for control (settings) of
binary output signals. Binary output is not switched to ground in the default configuration.
The maximum load for the binary output is 30V / 100mA. The constant current supplied by
the binary input is 3 mA.
Connect the cable ’s I/O connector to the router’s I/O port and tighten locking screws.
(See Fig. 35)
Fig. 34: Connection I/O cable