B&B Electronics RT3G-300_310_320_330_340-W - User Manual - Manual (Page 16)

B&B Electronics, Inc. SPECTRE User Manual
16
SPECTRE_User_Manual_2912m
www.bb-elec.com
www.bb-europe.com
4.2 Status Indicators
Label Color State Description
PWR Green
Blinking
On Router is ready
Router is initializing.
WAN* Red Blinking Communication in progress
DAT* Yellow
Flashing
PPP connection established
1 x flash per
second
Signal strength is from –50 dBm to –69 dBm
2 x flash per
second Signal strength is from –70 dBm to –89 dBm or the
difference between neighboring cells is exactly 3 dBm
3x flash per
second
Signal strength is from –90 dBm to –113 dBm or the
difference between neighboring cells is smaller than
3 dBm
USR Yellow Function selected by user
OUT Green On Binary output active
IN Green On Binary input active
ETH Green
On
Off Selected 100 Mbit/s
Selected 10 Mbit/s
ETH Yellow
On
Blinking
Off The network cable is connected
Data transmission
The network cable is not connected
PORT Green
LED functions for different router configurations appear in the charts
below.
PORT Yellow
LED functions for different router configurations appear in the charts
below.
SIM1* Yellow On SIM card 1 is active
SIM2* Yellow On SIM card 2 is active
* 3G models only
Table 4: Router status indication
Note: The State indication of the PPP LED is updated every 10 seconds.