Rainbow Electronics MAX9486 User Manual
Page 2
MAX9486
8kHz Reference Clock Synthesizer
with Multiple Outputs at 35.328MHz
2
_______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
DC ELECTRICAL CHARACTERISTICS
(V
DD
= V
DDP
= +3.0V to +3.6V, T
A
= -40°C to +85°C, unless otherwise noted. Typical values are at V
DD
= V
DDP
= +3.3V, T
A
=
+25
°C.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V
DD
to GND ...........................................................-0.3V to +4.0V
V
DDP
to GNDP.......................................................-0.3V to +4.0V
SHDN, REO, REIN, X1, X2, CLK_ to GND ...-0.3V to (V
DD
+ 0.3V)
LP1, SETI to GNDP.....................................-0.3V to (V
DD
+ 0.3V)
LP2 Internally Connected to GNDP
Short-Circuit Duration of Outputs ...............................Continuous
Continuous Power Dissipation (T
A
= +70°C)
24-Pin TSSOP (derate 12.2mW/°C above +70°C) .......976mW
Operating Temperature Range ...........................-40°C to +85°C
Maximum Junction Temperature .....................................+150°C
Storage Temperature Range .............................-60°C to +150°C
ESD Rating (Human Body Model) .......................................±2kV
Lead Temperature (soldering, 10s) .................................+300°C
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
DIGITAL INPUTS (REIN,
SHDN)
Input High Logic Level
V
IH
2.0
V
Input Low Logic Level
V
IL
0.8
V
Input-Current High Level
I
IH
V
IN
= V
DD
20
µA
Input-Current Low Level
I
IL
V
IN
= 0
-20
µA
DIGITAL OUTPUT CLOCKS (CLK1–CLK6, REO)
Output High Logic Level
V
OH
I
OH
= -4mA
V
DD
-
0.6V
V
Output Low Logic Level
V
OL
I
OL
= 4mA
0.4
V
POWER SUPPLY (V
DD
, V
DDP
)
Power-Supply Range
V
DD
3.0
3.6
V
PLL Power-Supply Range
V
DDP
3.0
3.6
V
Power-Supply Current
I
DD
+ I
DDP
(Note 2)
13
25
mA
Shutdown Supply Current
I
SHDN
8
30
µA