Cobalt Digital COMPASS 9223-SA Dual-Channel 3G_HD_SD MPEG-4 Encoder Unit - Manual (Page 78)

78
9223SA-OM (V2.0)
added, the connections can be managed using the functions in this table. A sample is depicted
below.
The following columns are available in this table:
•
Source Port: this column indicates the physical port of the connection. The possible
values are Encoder 1, Encoder 2, TPG 1 and TPG 2.
•
Source Name: this column contains the user-defined name for the source.
•
Output Port: this column indicates the physical output port for the connection. The
possible values are Ethernet 1, Ethernet 2, ASI 1 and ASI 2.
•
Output Name: If the Stream Display control at the top of the table is set to Stream
Names, this column will have the user-defined name for the output. If it is set to Stream
Addresses, it will have the destination IP address and UDP port for IP Outputs, and the
values ASI Output 1 and ASI Output 2 for the ASI ports.
•
Delete: if you click on this button, the corresponding connection will be deleted.
Connection Statistics Tab
The Connection Statistics Tab presents the combined status of all the established connections, in
one table. It includes the Source Port, Source Name, Output Port and Output Name fields to
identify the connections, and the rows are in the same order as the table in the Configuration
Tab. The Statistics tab contains two additional fields, the Source Status and the Output Status.
Since these are color-coded, it is simple to quickly identify any problems. If any of the Source
Status or Output Status indicators are red, the DashBoard™ Card State will be red as well, and
the front panel
STAT LED will also be red.