Cobalt Digital COMPASS 9223-SA Dual-Channel 3G_HD_SD MPEG-4 Encoder Unit - Manual (Page 63)

63
9223SA-OM (V2.0)
ASI Outputs Tab
The 9223-SA has 2 ASI output ports that can be independently configured. This tab is used to
configure and manage them.
ASI Ports: Configuration Tab
The default appearance of the Configuration tab is:
The ASI Outputs table contains the current configuration of the ports, as follows:
•
Status: Indicates the port status. It can contain the following values:
o OK: Port is operating normally.
o Unlocked: Port is unlocked. This means that the port is in Automatic Bit Rate
mode and it has no input.
o Overflow: Transmit overflow. This means that the ASI Output is in Manual
mode, and the configured bit rate is insufficient to carry the bitstreams connected
to it. This situation will raise an alarm as packets are being dropped.
•
Size: Indicates the configured transport packet size, in bytes.
•
TS Bit Rate (b/s): This reports the actual transport stream bit rate, in bits/second.
•
Port Name: This reports the user-configured Port Name.
•
Edit Button: Clicking on this button allows configuration of the port. The ASI Output
Configuration screen appears, with the settings for the selected port.
To configure an individual port, click on the Edit button for that port. The following
configuration interface opens: