Cobalt Digital COMPASS 9223-SA Dual-Channel 3G_HD_SD MPEG-4 Encoder Unit - Manual (Page 47)

47
9223SA-OM (V2.0)
•
Server Location: Select Remote to have the segments uploaded to a remote web server,
using FTP or SFTP; select Local to use the local server in the device itself.
•
Transfer Protocol: This configures the protocol to be used between the 9223 and the
web server for uploading the files. The two options are FTP and SFTP (Secure FTP).
FTP exchanges data and password in the clear, while SFTP encrypts both flows.
•
Server Address: Enter the IP address of the web server here. It needs to be reachable
from either one of the 9223 Ethernet ports. The 9223-SA is capable of connecting to
servers reachable through its control Ethernet ports.
•
Username: Enter the username to be used when uploading the files to the server.
•
Password: Enter the password corresponding to the user name, to be used when
uploading the files.
•
Server Path: Enter the absolute server path for the directory where the files should be
placed. It is recommended that a separate directory be created for each encoder.
•
Base File Name: Enter the base file name for the files created in the server. The encoder
will create the following files:
o basename.m3u8: This is the top playlist file. For the example above, where the
base file name is
live , the playlist file will be live.m3u8 . This file will
contain a single bit rate profile. It is created when the encoder starts, and not
changed during operation. For backward compatibility with previous versions, a
top playlist with a .m3u extension and identical contents will also be created.
o basename_p.m3u8: This is the current playlist file for the encoder profile. It is
updated every time a new segment is created.
o basename_XXXX.ts: These will be the bitstream encoded files. XXXX is an
increasing count. For the example above, the encoder will create files named