Grain Systems Unload Augers PNEG-1421 - Manual (Page 32)

4. Installation
32 PNEG-1421 Direct Gear Drive Bin Sweep Auger (with Roller Wells)
6. Place the hanger bearing bracket onto the connecting stub. (See Figure 4AD.)
Figure 4AD
7. Install the next section of flighting onto the connecting stub. Secure the flighting with bolts (See Note
for Bolt Size on Page 30) and stover nuts. (See Figure 4AE.)
8. Keep repeating Step 5 on Page 31-Step 7 for additional sections of flighting.
Figure 4AE
(See Note for Bolt Size on Page 30.)