beautypg.com

Hanger bracket assembly – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-720-G2 User Manual

Page 28

background image

5. Assembly

28

PNEG-720-G2 12" and 16" Series II Sweep

Hanger Bracket Assembly

A. Bolt the nylon bearings and hanger brackets to the connecting stubs using hex bolts, lock washers

and hex nuts as shown in

Figure 5E

.

Figure 5E

B. Bolt the hanger brackets to the back shields using two (2) 5/8"-11 x 2" hex bolts, two (2) square

washers, two (2) lock washers and two (2) hex nuts as shown in

Figure 5F

.

Figure 5F