VEGA WHA-GW-WIRELESSHART GATEWAY - Manual (Page 94)

WHA-GW-*
Appendix A
22
1981
2011
-0
7
94
10.1.2 Common Practice Commands
10.1.3 Wireless Commands
Command Action Description
Device Management Commands
41 Perform device self test Initiates the self test function in the
device
42 Perform device reset Immediately after the response the
microprocessor of the device will be
reset.
89 Set real-time clock 12 Bytes device identifier are given
in the response, if the given long
tag complies to the long tag of the
gateway.
90 Read real-time clock
512 Read country code
513 Write country code
Data Link Layer Commands
59 Write number of response
preambles The number of preambles insert in
response telegrams can vary from
2 to 20. Default setting is 4.
106 Flush delayed response buffers Flush all Gateway DR buffers.
I/O System Commands
74 Read I/O system capabilities Also returns number of detected
devices.
77 Send command to sub-device using
card/channel Request embeds full Hart
command.
85 Read I/O channel statistics using
card/channel Read channel communication
statistics.
86 Read sub-device statistics using list
index Read device communication
statistics.
84 Read sub-device identity summary
using list index Allows to read the Instrument list (a
single item at a time).
I/O System (HOST I/F) Commands
88 Write I/O system retry count
94 Read I/O system host statistics Read host I/F communication
statistics.
Command Action Description
Network information commands
768 Write join key Write the network's unique join key.
Only possible in security mode (see
chapter 5.4.1).
773 Write network ID Write the unique network ID.
774 Read network ID Read the unique network ID.
775 Write network tag Write the network tag. The network
tag identifies the device in the
WirelessHART network.