VEGA WHA-GW-WIRELESSHART GATEWAY - Manual (Page 74)

22
1981
2011
-0
7
74
WHA-GW-*
Operation
6.3 Additional DTM Functions
Accessing the Additional Functions windows
1. In the PACTware project, right-click on the device.
A context menu opens.
2. Select Additional functions > XYZ (XYZ = desired function).
Configuration Changed An operation was performed that changed the device's
configuration.
Device Malfunction The device detected a serious error or failure that
compromises device operation.
Cumulative Extended Device Status
These bits are set to 1 whenever the related status applies to one or more devices (or
sub-devices) connected to the gateway.
Maintenance Required One or more wireless devices require maintenance.
Device Variable Alert One or more wireless devices have a device variable alert.
This bit is set if any device variable is in alarm or warning
state.
Critical Power Failure One or more wireless devices have a power failure
(e.g. battery low).
Device Operation in Progress
These bits are set to 1 whenever the related procedure is ongoing in one or more devices
(or sub-devices) connected to the gateway. When an operation is ongoing, the Gateway
will return a "Busy" response code to any HART message of the host directed to the
relevant device (or sub-device). These bits are not latched and simply reflect the current
operation status.
"Configuration Changed bit
reset" procedure The "Configuration Changed bit" procedure is being
performed at one or more devices.
"Sub-Device update"
procedure One or more sub-devices of WirelessHART adapters are
being updated.
"Device update" procedure One or more wireless devices are being updated.
Table 6.5Diagnosis - Wired Communication - HART
Parameter Description