VEGA WHA-GW-WIRELESSHART GATEWAY - Manual (Page 80)

22
1981
2011
-0
7
80
WHA-GW-*
Operation
6.3.8 Firmware Upgrade
Upgrading the Gateway's firmware
1. In the web interface (see chapter 5.1), choose Additional Functions > Firmware Up-
grade.
2. To choose the firmware upgrade package (*.ipk) from your hard drive, press Browse.
After you have chosen the file, the path is displayed in the text field (see on page 80).
Firmware Upgrade: Choosing a file
3. Press Upload the Package.
The following screen is displayed (see on page 80).
Firmware Upgrade: Installing the package
4. To cancel the firmware upgrade, press Discard Upgrade.
5. To install the firmware upgrade, press Install the Package.
The package is being installed. The installation process may take a while. When the
installation is finished, Installation Successfully Completed is displayed on the
screen (see on page 81).
Note!
The function Firmware Upgrade is available only in the Gateway's web interface and not in
the DTM.