VEGA WHA-GW-WIRELESSHART GATEWAY - Manual (Page 93)

WHA-GW-*
Appendix A
22
1981
2011
-0
7
93
10 Appendix A
10.1 Supported Commands
The following tables show the HART commands supported by the device.
10.1.1 Universal Commands
Note!
The Gateway – unlike a HART multiplexer – only accepts commands directly addressed to
its HART slave address.
Command Action Description
Identity Commands
0 Read unique identifier 12 Bytes device identifier are given
in the response
11 Read unique identifier using tag 12 Bytes device identifier are given
in the response, if the given tag
complies to the tag of the gateway
21 Read unique identifier using long
tag 12 Bytes device identifier are given
in the response, if the given long
tag complies to the long tag of the
gateway
Static Parameter Commands
13 Read tag, descriptor, date Read the 8 digit tag, the 16 digit
description and the date.
18 Write tag, descriptor, date Write the 8 digit tag, the 16 digit
description and the date
12 Read message Read the 32 digit message
17 Write message Write the 32 digit message
20 Read long tag Read the 32 digit long tag
22 Write long tag Write the 32 digit long tag
16 Read final assembly number
19 Write final assembly number
Status Commands
38 Reset configuration changed flag Reset the "Configuration changed"
response code
48 Read additional status