VEGA WHA-GW-WIRELESSHART GATEWAY - Manual (Page 38)

WHA-GW-*
Commissioning
22
1981
2011
-0
7
38
Entering IP address and subnet mask
6. Choose Use the following IP address and type 192.168.1.100 into the field IP
address.
7. Type 255.255.255.0 into the field Subnet mask.
8. Press OK.
Your PC is now ready to communicate with the gateway.
4.6 Creating a new PACTware Project
4.6.1 Creating a new project
Creating a new project in PACTware
®
Select File > New or click the Create new project icon on the toolbar.
A new, unnamed project appears in the main window. The project initially consists of the
entry Host PC.
4.6.2 Adding the Communication DTM
A communication DTM is an interface between the FDT frame application and the device
DTM. The communication DTM enables communication between the device DTM and the
device connected to the PC.
Depending on how your PC is connected to the Gateway (via RS485 or Ethernet), you
need to add a corresponding communication DTM to your PACTware project. The RS485
communication DTM is the HART Communication DTM, and the Ethernet communication
DTM is called HART IP Communication.