VEGA WHA-GW-WIRELESSHART GATEWAY - Manual (Page 48)

WHA-GW-*
Configuration
22
1981
2011
-0
7
48
5.3 Identification Parameters
The identification parameters provide various information about the device and identify the
device within the network.
Figure 5.1Identification parameters
Identification Parameters
Note!
Many device parameters can be edited both online and offline. The parameters that can
only be edited online are especially pointed out in the following sections.
Parameter Description Default
Device Long Tag Identifies the device in a WirelessHART network. Enter up
to 32 characters.
–
Device Tag Identifies the field device within the process plant. Enter up
to 8 characters. –
Descriptor Further description of the device. Enter up to 16
characters. –
Date User-defined date (e.g. last parameter change). Format:
DD.MM.YYYY
The Date parameter is not modified by the Gateway itself.
Instead is has to be set by the user or Host application. –
Message User-defined message. Enter up to 32 characters. –
Country Code Select the country code of the country in which the device
is operated from this drop-down list. –
Table 5.1Identification Parameters