VEGA VEGAPULS 45 VBUS - Manual (Page 80)

80 VEGAPULS 42, 44 and 45 – VBUS
• Confirm your adjustments with "
OK".
Adjustment with the PC on VEGALOG
The menu window " Create new measurement
loop - Measurement loop designation" opens.
Enter:
- a measurement loop number
- a measurement loop description
- allocate one or several output signals to
your sensor.
• For example, configure a current output by
clicking to "
Current output".
In the menu window " Configure current out-
put", you choose a current output card in
your VEGALOG and allocate one or several
current outputs to the sensor.
• Confirm your adjustment with "
OK" and you
are again in the window " Create new meas-
urement loop - Measurement loop designa-
tion".
• Click to "
Quit" and you are again in the
initial menu.
You have carried out the special additional
configuration settings in conjunction with a
VEGALOG.
In the menu " Configuration/Measuring sys-
tem" you now see that one sensor is
configured.