VEGA VEGAPULS 45 VBUS - Manual (Page 51)

VEGAPULS 42, 44 and 45 – VBUS 51
As parameter you can choose "dimension-
less (plain numbers), volume, mass, height
and distance" and assign an appropriate
measuring unit (e.g. l, hl). The sensor display
then shows the measured value in the se-
lected parameter and unit.
• Save the adjustments in the menu " Scaling"
by clicking
"OK".
The adjustments are now transferred to the
sensor and you are again in the menu win-
dow "
Conditioning".
Adjustment with the PC on the signal conditioning instrument
Measurement loop data
• Click to the menu item "
Instrument data/
Parameter adjustment".
You are then in the entrance window " Instru-
ment data parameter adjustment".
• Click to the menu item "
Meas. loop data".
Here you get information on the application,
the sensor type and the signal conditioning
instrument.