VEGA VEGAPULS 45 VBUS - Manual (Page 43)

VEGAPULS 42, 44 and 45 – VBUS 43
Adjustment with the adjustment module
MINICOM
With the adjustment module MINICOM you
adjust the individual sensor directly in the
sensor or in the external indicating instrument
VEGADIS 50. The adjustment module
MINICOM with the 6 key adjustment field with
text display enables the parameter adjust-
ment of the sensor with an array of functions
comparable to the adjustment program VVO
or the VEGAMET signal conditioning instru-
ment, but not the configuration of the measur-
ing system.
Adjustment of the signal conditioning instru-
ment is only possible with the adjustment
program VVO or the 6 key adjustment field
on the instrument itself.
Setup
5.2 Adjustment with the PC on the
signal conditioning instrument
To connect the PC to the signal conditioning
instrument, the interface converter
VEGACONNECT is required. The PC com-
municates via the interface converter with the
signal conditioning instrument and the con-
nected sensors.
In the following setup and adjustment instruc-
tions you will find information on the following
topics and adjustment points:
•
Configuration
- create/modify measurement loop
- configuration info
•
Parameter adjustment 1
- adjustment
- conditioning/scaling
- meas. loop data
•
Sensor optimisation
- meas. environment/operating range
- meas. environment/meas. conditioning
- meas. environment/pulse velocity
- echo curve
- false echo storage
•
Parameter adjustment 2 (optional)
- user-programmable linearisation curve
- linearisation curve
- defining the linearisation curve by incre-
mental filling
- calculating the linearisation curve
- calculate cylindrical tank
•
Outputs
- configuration outputs
- parameter adjustment outputs
•
Display of measured value
•
Simulation
•
Backup
Note:
Keep in mind that you first have to log in a
sensor in the configuration menu before you
can continue with the parameter setting and,
if necessary, carry out adjustments in the
menu "
Sensor optimisation".