VEGA VEGASON 51V…53V - Manual (Page 74)

74 VEGASON 51 V … 53 V
Set-up - Adjustment with PC on VEGALOG
Configuration
The adjustment of an ultrasonic sensor on a
VEGALOG with the PC generally correponds
to the adjustment of an ultrasonic sensor on
the signal conditioning instrument, like in
chapter "
6.2 Adjustment with PC on
VEGAMET".
The difference is just in the higher configura-
tion requirement of VEGALOG. A number of
possible sensor inputs and signal outputs as
well as various processing routines must be
coordinated. First of all it must be defined
which sensor (input) should be processed
where and how.
Configuration Info
• Choose the menu "Configuration/Measur-
ing system"
You are in the menu " Configuration/Measuring
system", where a picture of the connected
VEGALOG is shown on the PC.
• Click to an individual card number and you
get in the window a " Card-Info".
• Click in the card info window of your EV-
card (input card VBUS) to "Configuration/
Measuring system".
You get a survey of the sensors connected to
the card.