VEGA VEGASON 51V…53V - Manual (Page 51)

VEGASON 51 V … 53 V 51
Back to the menu window " Conditioning" you
can enter a measured value integration with
the menu point "
Integration time". This is use-
ful for fluctuating product surfaces to avoid
that the measured value indication and output
changes permanently. As a standard feature
an integration time of 0 seconds is adjusted.
• Quit the menu with "OK" and you are now
again in the menu window "Instrument data
parameter adjustment".
• Quit the menu window with "OK".
Outputs
• Choose "Instrument data parameter ad-
justment".
• Choose in the menu window " Instrument
data parameter adjustment" the menu point
"Outputs".
You are in the menu window " Outputs".
• Click to "Current output" to adjust the signal
mode of the 0/4…20 mA output signal.
• If you have carried out adjustments in this
menu window, click to "Save".
• If you want to keep the adjustments without
saving, click to "Quit".
You are again in the menu window " Outputs".
• Click in the menu window " Outputs" to the
menu point "Display of measured value", and
choose "Sensor display".
• Choose under "Sensor No." "A" and under
"Parameter" "Scaled".
Set-up - Adjustment with PC on VEGAMET