VEGA VEGASON 51V…53V - Manual (Page 44)

44 VEGASON 51 V … 53 V
• Click to " OK", and you are in the main menu
window.
Before starting the configuration:
The signal conditioning instruments are
preconfigured dependent on the sensor type
you have ordered with the signal conditioning
instrument.
Generally you will use a preconfigured signal
conditioning instrument.
Hence you normally do not have to make any
adjustments in the menu "
Configuration" begin-
ning on this page and in this case you can
directly choose the menu "Parameter adjust-
ment" (on page 46).
Nevertheless the most important steps in the
menu "
Configuration" will be shown. If as an
exception your signal conditioning instruments
are not preconfigured, then start with the
subchapter "
Configuration" on this page and
continue with the adjustments in the subchapter
"
Parameter adjustment" on page 46.
Configuration
Create new measurement loop
• Choose the menu "Configuration/Measure-
ment loop/Create new " and you are in the
menu window "Create new measurement
loop - Application"
• Choose the parameter " Level measure-
ment " (gauge or distance) and the sensor
type (" pulse echo " for ultrasonic).
• Click to "Continue"
• Choose "Standard level measurement" and
"no options"
• Click to "Continue", and the menu window
"New application - select meas. loop"
opens.
Set-up - Adjustment with PC on VEGAMET