Veris Industries VWG-40 Install - Manual (Page 2)

2
Disclaimers
NO WARRANTY. Viconics, Inc. ( herein after referred to as “Viconics” ) makes no warranty as to the accuracy of or
use of this technical documentation. Any use of the technical documentation or the information contained therein is
solely at the risk of the user.
Documentation may include technical or other inaccuracies or typographical errors. Viconics reserves the right to make
changes to this document without prior notice, and the reader should in all cases consult Viconics to determine
whether any such changes have been made. The information in this publication does not represent a commitment on
the part of Viconics.
Viconics shall not be liable for incidental or consequential damages resulting from the furnishing, performance, or use
of this material.
This guide contains links and references to third-party websites that are not under the control of Viconics, and Viconics
is not responsible for the content of any reference material or linked websites. If you access a third party website
mentioned in this guide, then you do so at your own risk. Viconics provides these links only as a convenience, and the
inclusion of the link does not imply that Viconics endorses or accepts any responsibility for the content on those third-
party sites.
Electronic controls are static sensitive devices. Discharge yourself properly before manipulation and installing the
Viconics wireless gateway.
All Viconics wireless gateways and related wireless thermostats are to be used only as operating controls. Whenever a
control failure could lead to personal injury and/or loss of property, it becomes the responsibility of the user to add
safety devices and/or alarm system to protect against such catastrophic failures.
All VT7000 series wireless thermostats and associated VWG (Viconics Wireless Gateway) have been rigorously tested
to ensure reliable operation in most building applications using the latest 2.4 ZigBee technologies. Viconics cannot
guarantee against potential network interference should additional wireless systems be deployed sharing close
proximity.
Best practices covered in this manual and all related Viconics VWG documents should be considered as a guide to
apply Viconics Wireless Network devices only. The instructions included in this manual are based upon Viconics in
house testing and should be referred to as a guide only.
Viconics Inc. may not be held liable for continued reliable, or robust operation of any and all wireless based devices.
Although Viconics has taken many precautions in assuring the robustness of the VT7000 series wireless thermostat
product line and associated network access point (VWG-40-XXXX-1000) Please note; future application of additional
wireless devices utilizing the same or similar channels and / or frequencies may degrade performance of overall
system and / or reliability.
Non-approved modifications or changes made to the VWG or wireless thermostats may void the FCC compliance of
the VWG and wireless thermostats.
Ferrites supplied with the power supply and VWG MUST be installed according to instructions. Failure to do so may
void the FCC compliance of the VWG and wireless thermostats.
Only VWG-PS-DC and VWG-PS-AC power supply can be used with the VWG. The usage of another non-approved
power supply may void the FCC compliance of the VWG and wireless thermostats.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.