Veris Industries VWG-40 Install - Manual (Page 13)

13
Canadian Department of Communications( ICES-003)
This digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numerique respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Specifications
Platform
• PowerPC 405EP 250 MHz processor
• 64MB SDRAM & 64 MB Serial Flash
• 128 KB Static RAM
• Battery Backup - 5 minutes typical - shutdown begins within 10 seconds
• Real-time clock - 3 months backup max via battery
Operating System
• QNX RTOS
• IBM J9 JVM Java Virtual Machine
• NiagaraAX
Wired Communications
• 2 Ethernet Ports – 10/100 Mbps (RJ-45 Connectors)
• 1 RS 232 Port (9 pin D-shell connector)
• 1 RS 485 non-isolated port (3 Screw Connector on base board)
Wireless Communications
• Direct spread spectrum 2.4 GHz ISM bands
• Transmission power is under 1 mW at –0.4 dBm for channels 11 to 25 and –4.0 dBm for channel 26
Power Supply
• VWG-PS-DC 24 Vac to 15 Vdc panel mounted power supply for VWG
• VWG-PS-AC 120 Vac to 15 Vdc power supply for VWG with cord
Chassis
• Construction: Plastic, din rail or screw mount chassis, plastic cover
• Cooling: Internal air convection
• Dimensions: 6.313” (16.04 cm) W x 4.820”(12.24 cm) H (including connectors) x 2.438” (6.19 cm) D
Environment
• Operating temperature range: 0° to 50°C (32°F to 122°F)
• Storage Temperature range: 0° to 60°C (32°F to 140°F)
• Relative humidity range: 5% to 95%, non-condensing
Agency Listings
• UL 916, C-UL listed to Canadian Standards Association
• (CSA) C22.2 No. 205-M1983 “Signal Equipment”
• FCC Part 15 Subpart C
• C-tick (Australia)