TROY Group MICR_IRD 4300 Security Printing Solutions User’s Guide - Manual (Page 98)

Section 5 Installing the TROY Support Files
Security Printing Solutions User’s Guide -- Document #50-70376-001 Rev. D
5-12
STEP 5:
Check the
MICR Print
Quality
Maintaining high-quality MICR printing is vital to error-free reader/sorter processing of your checks at the bank.
TROY’s Security Printing Solutions have been consistently shown to have the lowest bank reject rates in the
industry. Poor MICR print quality will cause your checks to be rejected by the bank’s automatic MICR readers,
and therefore, you may incur significant manual processing fees from your bank for each rejected check. The
TROY MICR Quality Document is resident in your TROY Security Printer and can be printed out at any time
using the TROY Printer Utility or printer control panel. Use the TROY MICR Quality Document as a reference
to evaluate the general print quality of your TROY Security Printing Solutions product.
T
O PRINT THE TROY PRINT QUALITY DOCUMENT :
NOTE: TROY Secure EX
series printers must have
the printer keylock switch
set to “Print MICR” to
enable printing of the
MICR Quality Document.
1. From the Main Window, click on the printer
you wish to manage.
2. If you have already set an administrator or user
password, type the password into the password
box at the bottom of the Main Window. If a
password is not set, then leave the password box
blank.
3. From the Main Window, click on File, Print,
and then click on Print.
4. Click on the Quality Document. Choose either
the E-13B or CMC-7 version of this document.
The printer will automatically print the TROY
MICR Quality Document.