TROY Group MICR_IRD 4300 Security Printing Solutions User’s Guide - Manual (Page 118)

Section 7 Using the Printer Control Panel
Security Printing Solutions User’s Guide -- Document #50-70376-001 Rev. D
7-8
Using the
Exact
Positioning
Technology
(cont.) T O ADJUST THE POSITION OF THE MICR LINE
1. If not already logged into the printer control panel, enter a valid administrator password ( see page 7-2 ).
2. Press the W button to select TROY MENUS , and then press the button.
3. Press the W button to select SETTINGS MENU , and then press the button.
4. Press the W button to select the desired adjustment parameter ( MICR ADJUST X DECIPOINTS or MICR ADJUST Y
DECIPOINTS
), and then press the button.
5. Enter the desired decipoint offset value (-720 to +720) to reposition the MICR line (X=horizontal and
Y=vertical), and then press the button to save each decipoint value. Each decipoint is equal to 1/720th of
an inch. Repeat this step for each parameter you wish to change.
6. Press the W button to select AUTO ROTATION
, and then press the button.
7. Press the W button to select ENABLE or DISABLE , and then press the button to save this setting. If enabled, the
page will print upside down (180-degree rotation) from the currently defined orientation.
8. Print a test page to evaluate the MICR line position adjustment. Repeat the adjustment as necessary. Use the
TROY MICR Document Template to verify all MICR line adjustments.