TROY Group MICR_IRD 4300 Security Printing Solutions User’s Guide - Manual (Page 104)

Section 6 Using the TROY Port Monitor
Security Printing Solutions User’s Guide -- Document #50-70376-001 Rev. D
6-3
Installing the
TROY Port
Monitor
Accessing
the TROY
Port Monitor
To install the TROY Port Monitor, ensure that the appropriate printer drivers are installed first, and then install
the port monitor (follow the instructions described in Section 5 –
Installing the TROY Support Files ). The TROY
Port Monitor software is located on the TROY Security Printing Solutions CD supplied with your TROY
Security Printing Solution.
The screens required to access the TROY Port Monitor differ slightly between the Windows operating systems
supported by the TROY Port Monitor (Microsoft Windows 95/98, ME, 2000/NT4.0, and XP). Once the TROY
Port Monitor is accessed, the screens within the TROY Port Monitor will appear identical across all Windows
operating systems.
T O ACCESS THE TROY PORT MONITOR IN W INDOWS 95:
1. Click on Start, Settings, and then
Printers.
2. Right-click on the desired TROY
printer icon, and then left-click
on Properties.
3. Click on the Details tab. Select
the desired printer driver and
port that corresponds to the
TROY printer being used, and
then click on Port Settings to
access the TROY Port Monitor.