Ohaus EXPLORER PRECISION HIGH CAPACITY BALANCES Manual - Manual (Page 66)

EN-64 EXPLORER BALANCES
A numeric input window appears.
Enter the actual water temperature, then press Done.
The display returns to the previous screen with the new value
highlighted.
To return to the Density Determination home screen,
touch Return to Application.
To begin the Density Determination process,
press Begin Density Determination.
(See below.)
Step 1 of 2 –
Weigh the
Sample in Air.
Press Begin
Density
Calculation.
Follow screen
instructions,
then press
Accept
to store the dry
sample weight
(“in air”).
Step 2 of 2 –
Weigh the
Sample
Submerged in
the Liquid.
Follow the
screen
instructions,
then press
Accept
to store the
sample weight
(submerged
in liquid).
Once the necessary weights have been determined, the density of the sample is displayed in g/cm
3
(along with the weight in air, weight in water) on the Application screen.
Press Begin Density Determination to reset all the weight values and restart the process.