Ohaus EXPLORER PRECISION HIGH CAPACITY BALANCES Manual - Manual (Page 32)

EN-30 EXPLORER BALANCES
A new screen appears saying:
Place reference weight on the pan. Press Accept to
continue.
This establishes a new reference weight with a sample.
Alternatively, fill in values in the screens for
APW, Samples and Target, as shown below.
After following these instructions, and setting all values
as desired, press Return to Application.
4.2.4
Statistics for Parts Counting
Use the Statistics function to compare a number of samples and examine the relative deviation of the samples
along with other statistical data. A minimum of three samples is required.
Statistics can be determined manually (Manual mode, with key press after each step) or automatically
(Auto Mode: weights are automatically recorded when stable).
To use the statistics function, enable it first in the Application Setup menu.
Application Setup
First, Enable Statistics
Touch the Setup
Icon wrench (as
above) to enter
Setup menu.
Press Statistics and choose either Manual or Automatic, then press Close.
Press Done on the main options menu to return to the home screen.