Ohaus EXPLORER PRECISION HIGH CAPACITY BALANCES Manual - Manual (Page 64)

EN-62 EXPLORER BALANCES
4.9.3 Differential Weighing with Auto-Process On
Differential weighing with Auto Process On requires the initial and final weights to be sequentially gathered for a
single item.
To enable this feature, touch the Setup icon (wrench) from the
home screen to enter Application Setup.
Press Auto Process to turn it On.
Follow the screen instructions to begin.
The DIFFERENTIAL WEIGHING – Auto Home screen
Main Display Line
Second Display Line (not shown)
Reference Fields
Application Buttons
Functions Application Icon
Follow the screen instructions:
Press Item Settings to set up items in memory if necessary.
Use the buttons as necessary.
Follow the same steps as shown on page 57.
Press Return to Application when ready.
A message prompts for Item 1 to be placed on the pan again,
then to press Accept to establish Final Weight.
After Accept is
pressed, the dif-
ference be-
tween initial and
final weights
appears in the
Reference
Fields.
A message
prompts to start
the process
again, if
desired.