Ohaus EXPLORER PRECISION HIGH CAPACITY BALANCES Manual - Manual (Page 22)

EN-20 EXPLORER BALANCES
4. APPLICATIONS
The balance can be configured to operate in various Application modes.
Touch Applications to choose
– or the top button in the Application area:
Note: If an application mode does not appear in the list of available Applications it must be enabled in the User
Menu: touch Menu, then select Application Modes. The full list of modes appears. Touch the one you want to
enable. Then touch Enabled in the setup menu for that application mode
– Percent Weighing in the example
below. Each enabled mode appears in the Applications menu.
The Explorer Balance incorporates the following Applications.
Weighing Parts Counting Percent
Weighing
Check
Weighing
Dynamic
(Animal)
Weighing
Filling
Totalization Formulation Differential
Weighing
Density
Determination
Peak Hold
(High Point)
Ingredient
Costing
Pipette
Adjustment
(not available in
EX12001,
EX24001,
EX35001)
Statistical
Quality Control
(SQC)
Library
(complements most Applications)