Ohaus EXPLORER PRECISION HIGH CAPACITY BALANCES Manual - Manual (Page 28)

EN-26 EXPLORER BALANCES
4.2.1.2 Sample Size
The sample size can be 1 to 10 000 pieces. The default
sample size is 10. Once a sample size is changed, the balance
will immediately open the Recalculate APW screen, expecting
to establish a new APW.
The current sample size is shown on the Settings screen.
To adjust the sample size, touch the Samples button.
A numeric input window appears.
Key in the desired Sample Size, then press .
The next screen appears, with the message to place the number
of pieces entered in the numeric input window.
Place the indicated number of pieces on the platform.
Then touch either Tare, Cancel, or Accept.
Press Accept to capture the value and return to
the Settings screen.
The Settings screen appears with the new APW value
highlighted.
To begin counting pieces, touch Return to Application.