M&C TechGroup SP2400-H Data sheet - Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
2.1
Embracing Challenge
ƒ ƒ
Optimum operational reliability
ƒ ƒ
Universal applicability
ƒ ƒ
Adaption to nearly all process condi-
tions due to its compact and modular
design
ƒ ƒ
Easy mounting and maintanance
ƒ ƒ
Small volume, fast response time
Special Features
Gas Sample Probe Series SP®
Version SP2000, SP2000-H, SP2300-H, SP2400-H
SP2000-H
Application
The M&C sample probes version SP2000...,
SP2300-H and SP2400-H are used for con-
tinuous extraction of gases from dust loaden,
hight temperature and/or humid processes.
Description
The sample probes are designed for easy
installation, reliable operation and trouble
free maintenance. They are versatile in appli-
cation and depending on the task to be
performed various sample tubes or pre-filters
(see data sheet 2.14 and 2.17), not included in
the scale of delivery, can be simply screwed
into the probe (G 3/4» thread).
The filter element (ceramic is standard,
others optional) with a large surface area
and high capacity is located in the external
housing.
The design offers little or no stag-
nant space external to the process. The
probes are designed so that changing
a filter element does not involve the use
of tools. In this operation neither the sam-
ple probe tube nor sample line need to
be removed, thus avoiding contamination
of the clean gas path and maintaining the
integrity of the system.
The sample tube can be cleaned, washed or
rodded-out from outside the process. The
special design of the heating element of the
SP2000/2300/2400-H (with protective hood)
permits controlled heating of the complete
filter housing, including the mounting flange
up tp 180 °C (Version /H320 up to 320 °C).
This ensures reliable operation external to the
process preventing the temperature falling
below the dew-point.
The temperature of the standard probe is
controlled by an integral compact design
capillary sensor thermostat with an excess
temperature limit switch and an alarm func-
tion for temperature failure. The probe can be
provided with test and reference gas facilities.
Depending on the gas composition, it is pos-
sible that the standard material of the probe
body (stainless steel 316) will not be suffi-
ciently corrosion resistant. In this case probe
SP2300-H made of PTFE or SP2400-H made of
Titanium should be used.
Technical specifications and illustrations are without
obligation, subject to modifications. 10.04/06.06