M&C TechGroup SP3110 Data sheet - Manual (Page 7)

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
2.11
Options Version Part No.
Stainless steel pre-filter with volume displacer, length 220mm, 46mm o.d., filter porosity 2µm,temperature max. 600°C, material
SS316 V20-0 20 S 9105
Hastelloy pre-filter with volume displacer, length 220mm, 46mm o.d., filter porosity 2µm, temperature max. 900°C, material
Hastelloy-C V20-0/HC 20 S 9115
Stainless steel pre-filter with volume displacer, length 520mm, 60mm o.d., filter porosity 2µm, temperature max. 600°C, material
SS316 V20-1 20 S 9145
Hastelloy pre-filter with volume displacer, length 520mm, 60mm o.d., filter porosity 2µm, temperature max. 900°C, material
Hastelloy-C V20-1/HC 20 S 9155
Hastelloy pre-filter with volume displacer, length 520mm, 60mm o.d., filter porosity 0,5µm,temperature max. 900°C, material
Hastelloy-C V20-1/HC 20 S 9156
Stainless steel pre-filter with volume displacer, length 300mm, 31mm o.d., filter porosity 2µm, temperature max. 600°C, material
SS316 V20-3 20 S 9300
Extra charge for extension of insitu stainless steel filter V20-3 or V20-4 for each 100 mm further length (from standard length
300mm to .... mm), max. 1000 mm total filter length, material: SS316.········· V20-3 20 S 9310
Backflushable hose pre-filter with internal support tube, length: 400mm, 40mm o.D., filter porosity 15µm,temperature max.
200°C, material PTFE, SS316 V20-T 20 S 9315
Insitu ceramic filter tube in double-layer version for high blow back efficiency, with volume displacer, length 500mm, 40mm
o.d., filter porosity 1µm, temperature max. 1000°C, material ceramic, SS316, connection G3/4" V12-1A-1 20 S 9559
Extension tube for V20.. with internal volume displacer , length 500mm, temperature max. 600°C, material SS316 Vm500 20 S 9165
Extension tube for V20.. with internal volume displacer , length 1000mm, temperature max. 600°C, material SS316 Vm1000 20 S 9170
Extension tube for V20.. with internal volume displacer , length 1500mm, temperature max. 600°C, material SS316 Vm1500 20 S 9175
Options sample tubes
Options Version Part-No.
Length 1m, material SS316Ti, temperature max. 600 °C SP2000/SS 20 S 9065
Length 1m, with volume displacer, material SS316Ti, Temperatur max. 600 °C SP2000/SS-Vm 20 S 9067
Length 1m, material Hastelloy-C, temperature max. 900 °C SP2000/HC 20 S 9090
Length 1m, material Kanthal, temperature max. 1300 °C SP2000/KA 20 S 9080
Length 1m, material Incoloy 956, temperature max. 1200 °C SP2000/IC 20 S 9072
For choosing the adequate pre-filter see data sheet 2-1.1.0.8 as well
For choosing the adequate sample tube see data sheet 2-1.1.0.6 as well
Temperature classes for sampling from zone 1 or 2
Type Possible Options* Marking Temperature class Max. process gas temp. (°C) at probe
entry Max. surface temperature (°C)
SP3110V..
II 2 G / 2 GD
T6 ≤ 80 80
SP3110V..
II 2 G / 2 GD
T5 ≤ 95 95
SP3110V.. /RS, /HEX4-135
II 2 G / 2 GD
T4 ≤ 130 135
SP3110.. /RS, /HEX..
II 2 G / 2 GD
T3 ≤ 195 195
SP3110.. /RS
II 2 G / 2 GD
T2 ≤ 200 200
* all further options mentioned on page 2 and 3 can be used additionally in all temperature classes
Options pre-filter and extension tubes
Technical specifications and illustrations are without
obligation, subject to modifications. 10.04/11.12