M&C TechGroup FA1-H Operator's manual - Manual (Page 12)

12
Gas sampling and gas conditioning technology 5-6.15ME
For the electrical connection, the following steps have to be carried out (see also figure 2+3):

Loosen the 4 lid screws and remove the lid of pre-amplifier K-FA-H.

Lead the connection cable through the respective clamping screw.

The electronic controller FA-1.. has to be connected on clamping block X1, terminals 5 =
yellow, 7 = white and 8 = brown.
Further electrical connection of the electronic controller FA-1.. is described in manual 5-6.10ME,
chapter 13.
Figure 2 Electrical connection of the pre-amplifier K-FA-H
Figure 3 Electrical connection FA1-H
8 7 6 5 18 17 16 15
1 2 3 14 11 12
L N P
E
br ws ge br ws ge
FA-K-H FA1.1
and
FA1.4
NC