M&C TechGroup FM-200K-H_FA Operator's manual - Manual (Page 8)

8
Gas sampling and gas conditioning technology 5-6.5.1-ME
10 TECHNICAL DATA
Technical Data FM-2K FM-200K-H FM-200K-H/FA
Part-No. 09F2105 09F2505 09F2555 **
Heated / needle valve in the
inlet no yes yes
Optical flow control, mono-stable ** no no fix between 20 - 50%
of scale
Standard measuring range 25-250 l/hr air, 1.2 bar, 180°C
Measuring ranges available Scale: 1.6-16, 6-60, 10-100, 25-250, 50-500, 80-800 l/hr air,
1.2 bar, 180°C
Operating pressure / operating
temperature max. 2 bar / max. +180°C
Ambient temperature -40 to +180°C -25 to +60°C -25 to +50°C
Storage temperature -40 to +80°C -25 to +80°C
Gas connections ¼“ NPT i Tube fittings Swagelok ø6mm, optional ø1/4“
Temperature controller -----------------------------
Capillary thermostat, integrated in electrical
connection box with high temperature limiter
and low temperature alarm contact
Operating temperature ----------------------------- adjustable from 0 to 180°C, set in factory at
180°C
Temperature alarm contact -----------------------------
alarm point

T -30°C to T
Set
change over contact, voltage free; contact
rating 250V, 3A

, 0,25A=
Power supply ----------------------------- 230V 50Hz, 220VA optional 115V 60Hz (a)
Electrical connections ----------------------------- Terminals 2,5 mm², 2x Cable glands PG13
Protection / Electrical
standard ----------------------------- IP 54 EN60529 / EN 61010, EN60519-1
Dimensions 50 x 290 x 50mm (w x
h x d)
250 x 500 x 140mm (w x h x d)
Weight 0.8 kg 8 kg 8.5 kg
Dead volume / Mounting approx. 6 cm³ / wall mounting
Material of sample contacting parts glass, stainless steel 316, PTFE
** The optical flow alarm is only equipped with pre-amplifier K-FA-H, the electronic controller must be ordered separately
.
0
10
20
30
40
50
0 150 300 450 600 750 900 1050
Nl/hr
m
b
a
r
Figure 1 Flow rate in Nl/hr air and differential pressure in mbar