EVS IPDirector Version 4.4 - March 2008 Part 1 User's Manual - Manual (Page 59)

Issue 4.4.B IP Director Version 4.4 – User Manual – Part 1: Introduction
EVS Broadcast Equipment – March 2008
48
3.4.8 H
OW TO
A
SSOCIATE
C
HANNELS TO
P
ROVIDE A
PGM/PRV
M
ODE
At least 2 player channels must be available to run this configuration. To initialize
this mode, use the standard command of SHIFT + click or CTRL + click to select
the channels required, then use right-click to see the contextual menu, and select
the PGM/PRV command from the menu.
For each XT server it is only possible to make a PGM/PRV pair of channels from
PGM1/PGM2 or from PGM3/PGM4 of the server. PGM1 or PGM3 are always the
PGM channels and PGM2 or PGM4 will always be the PRV channels. This mode
allows the operator to play several clips ‘back to back’ with transition effects.
When playing single clips, the next clip can be selected on the PRV channel and a
TAKE button is present and active on the designated PGM control panel in this
mode to allow the clip selected on PRV to be transitioned to manually.
When running a play-list this mode provides the PRV channel necessary for using
transitions.
Please refer to the section on PGM-PRV settings in the Control Panel Chapter for
a detailed description of the settings available for this mode.