EVS IPDirector Version 4.4 - March 2008 Part 1 User's Manual - Manual (Page 45)

Issue 4.4.B IP Director Version 4.4 – User Manual – Part 1: Introduction
EVS Broadcast Equipment – March 2008
34
2.7.6 H
OW TO
C
HANGE THE
C
URRENT
P
ROFILE
You can change the current metadata profile, i.e. the profile that will be
associated by default to the new clips when they are saved.
To change the current profile, proceed as follows:
1. In the main IP Director window, select the menu Metadata > Edit Current
Default Metadata.
The Edit Current Profile and Default Values window opens:
2. In the Clip Profile field, select the profile to be used as current profile.
All the fields of the profile are displayed below the Clip Profile field.
3. Click OK.
The new current profile is loaded and will now be associated by default to all new
created clips.