EVS IPDirector Version 4.4 - March 2008 Part 1 User's Manual - Manual (Page 26)

IP Director Version 4.4 – User Manual – Part 1: Introduction
EVS Broadcast Equipment - – March 2008
Issue 4.4.B
15
Display option Description
Display XTs, Page
and Bank All elements are listed on the level down of the
page/bank they belong to.
Language
The language setting makes it possible to change the interface language to the
selected language. This is not fully available on this version.
Key Default Output
The Key Default Output buttons make it possible to define the forced key channel
colour when the user loads a Fill clip that is not associated with a Key clip:
• A black key channel will be forced if the Black option is selected.
• A white key channel will be forced if the White option is selected.
Transport Settings
The Transport settings are applied to all Control Panels on the workstation; they
are not specific to active control panels.
For more information on Transport settings, refer to the Player Control Panel
chapter, in part 3 of the User manual.
Clip Creation Settings
The same remark as for Transport settings is valid for Clip Creation settings.
For more information on Clip Creation settings, refer to the Player Control Panel
chapter, in part 3 of the User Manual.
Take Effect Settings
The same remark as for Transport settings is valid for Clip Creation settings.
For more information on Take Effects settings, refer to the Player Control Panel
chapter, in part 3 of the User Manual.
Play-List Settings (3 tabs)
The Play-List settings are explained in details in the Play-list Editor chapter, in
part 3 of the User Manual.
GPI and Auxiliary Track Settings
The GPI and Auxiliary track settings are explained in details the Play-list Editor
chapter, in part 3 of the User Manual.