EVS IPDirector Version 4.4 - March 2008 Part 1 User's Manual - Manual (Page 47)

Issue 4.4.B IP Director Version 4.4 – User Manual – Part 1: Introduction
EVS Broadcast Equipment – March 2008
36
2.7.8 H
OW TO
R
ESET THE
D
EFAULT
V
ALUES IN A
P
ROFILE
If you have modified the default values of a metadata profile in IP Director, you
can reset the initial default values at any time, as they were defined when the .xml
file was imported.
To reset the default values of a profile, proceed as follows
1. In the main IP Director window, select the menu Metadata > Edit Current
Default Metadata.
The Edit Current Profile and Default Values window opens:
2. In the Clip Profile field, select the profile to be managed.
All the fields of the profile are displayed below the Clip Profile field.
3. Select the Reset Default Values button on the bottom left part of the
window.
4. Click OK.
The default values have been reset to the initial ones.