EVS IPDirector Version 4.4 - March 2008 Part 1 User's Manual - Manual (Page 49)

Issue 4.4.B IP Director Version 4.4 – User Manual – Part 1: Introduction
EVS Broadcast Equipment – March 2008
38
H
OW TO
C
REATE A NEW
L
AYOUT
To create a new Layout, proceed as follows:
1. Click Layout > New
2. Enter the appropriate information in the Properties window that appears:
and click OK.
3. The following option window appears:
Click Yes if you want to start from a clean working area or No if you want
to create a new Layout based on your current working area.
H
OW TO
O
PEN AN
E
XISTING
L
AYOUT
To open an existing Layout, proceed as follows:
1. Click Layout > Open
2. Select a Layout in the Load Layout window and click Load.