EVS IPDirector Version 4.4 - March 2008 Part 1 User's Manual - Manual (Page 46)

IP Director Version 4.4 – User Manual – Part 1: Introduction
EVS Broadcast Equipment - – March 2008
Issue 4.4.B
35
2.7.7 H
OW TO
M
ODIFY THE
D
EFAULT
V
ALUES OF A
P
ROFILE
When a metadata profile is imported into IP Director, the default values specified
in the .xml file are imported. It is possible to modify the default values of a profile.
To modify the default values of a profile, proceed as follows
1. In the main IP Director window, select the menu Metadata > Edit Current
Default Metadata.
The Edit Current Profile and Default Values window opens:
2. In the Clip Profile field, select the profile to be managed.
All the fields of the profile are displayed below the Clip Profile field.
3. Select or enter the desired default values in the profile fields.
4. Click OK.
The new specified values will now be used as default values for the new created
clips.