5 recorder panel, 6 ingest scheduler, 7 vtr control panel – EVS IPDirector Version 4.4 - March 2008 Part 1 User's Manual User Manual
Page 17: Recorder panel, Ingest scheduler, Vtr control panel, 7 vtr

Issue 4.4.B
IP Director Version 4.4 – User Manual – Part 1: Introduction
EVS Broadcast Equipment – March 2008
6
1.1.5 R
ECORDER
P
ANEL
The Record Panel is the graphical user interface used to control the recorder
channels of an XT server. The Recorder Control Panel shows the record status of
a channel and can enable channels to start or stop recording depending upon the
XT server base configuration. In conjunction with the buttons on the VGA, there
are also keyboard shortcuts and dedicated buttons on the optional ShuttlePRO
controller. Where they are shown, these are the default settings.
1.1.6 I
NGEST
S
CHEDULER
Ingest Scheduler allows for clips to be automatically made from any record
channel under the control of IP Director at either a time scheduled in advance or
entered manually by the user. This means multiple events over a period of time
can be automatically stored. A clip can be created on a channel with a name, level
rating and metadata associated with it, and also be automatically placed into a bin
in the Database Explorer.
1.1.7 VTR
C
ONTROL
P
ANEL
The VTR Control Panel allows a VTR (Video Tape Recorder) to be controlled from
IP Director. It is an advanced remote control, from within the IP Director
application.
Apart from playback and record control, it also allows the extraction of clips from
a tape to the XT servers.