Information available in the message bar, Message colour, Message filter – EVS IPDirector Version 4.4 - March 2008 Part 1 User's Manual User Manual
Page 38: 5 copy/move status panel, Accessing and closing the copy/move status panel, Copy/move status panel

IP Director Version 4.4 – User Manual – Part 1: Introduction
EVS Broadcast Equipment - – March 2008
Issue 4.4.B
27
I
NFORMATION
A
VAILABLE IN THE
M
ESSAGE
B
AR
The messages include the following information:
•
the date and time when the message was generated
•
the message itself
•
the type of message
M
ESSAGE
C
OLOUR
The messages are highlighted in a different colour depending on the type of
message:
•
An information message is highlighted in green.
•
A warning message is highlighted in yellow.
•
An error message is highlighted in red.
•
The selected message has a darker background than the normal background.
M
ESSAGE
F
ILTER
The user can perform a filter on the message type by clicking the message type
icons displayed on the top left corner of the expanded Message bar:
•
When the message type icon has a pink background, the messages that belong
to that type are displayed, if any.
•
When the message type icon has a blue background, the messages that belong
to that type are not displayed.
2.6.5 C
OPY
/M
OVE
S
TATUS
P
ANEL
The Copy/Move Status panel provides information on the clips that are being or
have been copied or moved to another location. It will only display the moves or
copies to another XT server than the one where the clip was initially stored.
A
CCESSING AND
C
LOSING THE
C
OPY
/M
OVE
S
TATUS
P
ANEL
You will access the Copy/Move Status panel via the Message panel, by selecting
Copy/Move Status from the drop-down list on the top right corner of the Message
panel, as shown in the screenshot below.