EVS IPDirector Version 5.9 - January 2011 Part 1 User’s Manual - Manual (Page 93)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment – January 2011
82
3.3.9 H
OW TO
U
NGANG
G
ANGED
C
HANNELS
To ungang ganged channels, proceed as follows:
1. Select the ganged channels with SHIFT+click or CTRL+click.
2. Right-click one of the channels and select Ungang.
Note
Channels can be selected even if they are part of different groups. Each
selected channel will be removed from the ganged group of channels it
was part of.
3.3.10 H
OW TO
A
SSOCIATE
C
HANNELS IN
PGM/PRV M
ODE
This mode allows you to play several clips ‘back to back’, with transition effects.
When playing single clips, the next clip can be selected on the PRV channel and a
TAKE button is present and active on the designated PGM control panel in this
mode, to allow the clip that is selected on PRV to be transitioned to manually.
When running a playlist, this mode provides the PRV channel that is necessary for
using transitions.
Please refer to the section on PGM/PRV settings in the Control Panel chapter for
a detailed description of the available settings for this mode.
At least 2 player channels must be available to define this association.
To associate channels in PGM/PRV mode, proceed as follows:
1. Select two channels with SHIFT+click or CTRL+click.
2.
• Right-click one of the selected channels and select Pgm/Prv.
OR