EVS IPDirector Version 5.9 - January 2011 Part 1 User’s Manual - Manual (Page 124)

IPDirector Version 5.9 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment -– January 2011
Issue 5.9.B
113
How to Browse a Clip in the Tree View
To browse clips when the prerequisites are met, proceed as follows:
1. Press the BROWSE button on the remote.
The Database Explorer linked to the remote becomes active on screen.
The Browse mode of the Database Explorer is enabled
The focus is in the grid.
2. Use the PREV button to move to the tree view.
3. In the tree view, only the Clips plug-in and the Bins/Clips plug-in can be
browsed. Use the wheel to move from one plug-in to the other.
4. Press the ENTER button to open or close a tree node.
The corresponding list of clips is displayed in the grid.
5. Press the NEXT button to be able to browse the list.
How to Browse a Clip in the Saved Filters
To browse clips when the prerequisites are met, proceed as follows:
1. Press the BROWSE button on the remote.
The Database Explorer linked to the remote becomes active on screen.
The Browse mode of the Database Explorer is enabled
The focus is in the grid
2. Press the NEXT button to move to the saved filters, if the pane is displayed.
3. Use the wheel to select a filter.
4. Press the ENTER button to apply a filter.
5. Press the PREV button to move to the grid and browse clips.
6. To cancel the filter, press the CLEAR button then the ENTER button.