EVS IPDirector Version 5.9 - January 2011 Part 1 User’s Manual - Manual (Page 123)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment – January 2011
112
Browsing Clips
Browsing through clips is done in the Database Explorer. The users can navigate
in the grid, in the tree view or in the saved filters pane if it is displayed. To move
from one pane of the Database Explorer to another, use the following remote
buttons:
• NEXT: move from grid → saved filters, if the pane is displayed → tree view
• PREV: move from grid → tree view → saved filters, if the pane is displayed.
Note
The active pane is not highlighted. When you turn the remote wheel, you
will see in which pane the selection is moving.
Prerequisites
To be able to browse a clip with the remote, some conditions must be met:
• a player channel or the Software player must be controlled by the remote
• the player channel or Software player controlled by the remote must be
assigned to the Database Explorer
• the remote must be linked to the Database Explorer by double-clicking the
Remote B area on the status bar of the Database Explorer.
How to Browse a Clip in the Grid
To browse clips when the prerequisites are met, proceed as follows:
1. Press the BROWSE button on the remote.
The Database Explorer linked to the remote becomes active on screen.
The Browse mode of the Database Explorer is enabled
The focus is in the grid.
2. Use the wheel to select a clip:
• in clockwise to select the next clip
• in a counter-clockwise to select the previous clip.
The selected clip is cued on its IN point.
3. To send the loaded clip the default playlist, do one of the following:
• Press the ENTER button to append the current clip to the default playlist.
• Press SHIFT then ENTER to insert the current clip to the default playlist
before or after the on-air element, according to the settings.
To send the clip to the predefined destination:
• Press the SEND TO button.